Clima Micro Plus 5A (Minimum speed)

Clima Micro Plus Minimum Fan Speed

With the Clima Micro Plus Minimum Fan Speed you control the minimum speed of your fan to achieve or to maintain the desired temperature level in your room.

This efficient controller is easy to operate with just two rotary knobs to set the minimum speed (0 – 100% of the capacity) of your fan and the desired room temperature (between 15 °C and 35 °C). The Clima Micro Plus Minimum Fan Speed also has the option to set a hysteresis (1 °C – 5 °C).

The clear display shows the current room temperature, as well as temperature setpoint, fan speed, minimum and maximum measured temperature, and hysteresis. The colour of the LED shows whether the room has a stable climate or too high a temperature.

Features

- The Clima Micro Plus Minimum Fan Speed can measure and display the current temperature value of connected sensors, and record and display the minimum/maximum values

- Controls the minimum fan speed to reach or maintain the desired temperature

- LED indicates stable climate or high temperature

- Minimum fan speed and temperature setpoint are saved in the event of a power failure

- Temperature setting range: 15 °C – 35 °C

- Hysteresis setting range: 1 °C – 5 °C

- Minimum fan speed setting range: 10% – 100%

- The display is updated every second

- Automatic switch off of the display backlight after 60 seconds

- Automatic detection of cable failure or poor connection with the sensor

- 2 UTP ports

- Available in the version: 5A

- Easy fuse replacement (spare fuse included)

- Minimum required sensor: TempProbe

- Various sensors are available separately

- Possibility to connect the TechGrow Datalogger (DL-1)

Click on link to open the manual available in 5 languages:
TechGrow Clima Micro Plus 5A (Minimum speed) V1.03 Manual