Clima Micro Plus 5A (Min-Max speed)

Clima Micro Plus Min/Max Fan Speed

With the Clima Micro Plus Min/Max Fan Speed you achieve or maintain the desired temperature level in your room in a very efficient way.

The Clima Micro Plus Min/Max Fan Speed is easy to operate with three rotary knobs to set the minimum and maximum fan speed, and the desired room temperature (between 15 °C and 35 °C). The controller even allows you to set a hysteresis (1 °C – 5 °C).

The clear display shows the current room temperature, as well as temperature setpoint, fan speed, minimum and maximum measured temperature, and hysteresis.

Features

- The Clima Micro Plus Min/Max Fan Speed can measure and display the current temperature value of connected sensors, and record and display the minimum/maximum values

- Controls the minimum and maximum fan speed to reach or maintain the desired temperature level

- Minimum fan speed, maximum fan speed and temperature setpoint are saved in the event of a power failure

- Temperature setting range: 15 °C – 35 °C

- Hysteresis setting range: 1 °C – 5 °C

- Minimum fan speed setting range: 10% – 100%

- Maximum fan speed setting range: 45% – 100%

- The display is updated every second

- Automatic switch off of the display backlight after 60 seconds

- Automatic detection of cable failure or poor connection with the sensor

- 2 UTP ports

- Available in the version: 5A

- Easy fuse replacement (spare fuse included)

- Minimum required sensor: TempProbe

- Various sensors are available separately

- Possibility to connect the TechGrow Datalogger (DL-1)

Click on link to open the manual available in 5 languages:
TechGrow Clima Micro Plus (Min-Max speed) V1.15 Manual